Fig. 1: Fuel filter mounting — 1997–98
MPV
|
- Before servicing the vehicle, refer to the precautions in the beginning
of this section.
- Relieve the fuel system pressure.
- Remove or disconnect the following:
- Negative battery cable
- Fuel line clamps
- Fuel lines
- Fuel filter
To install:
- Install or connect the following:
- Fuel filter. Tighten the bracket nut to 70–95 inch lbs. (8–11
Nm).
- Fuel lines
- Fuel line clamps
- Negative battery cable
- Start the engine and check for leaks.
The fuel filter is located in the fuel tank as part of the fuel pump module.